3D Panel

Release Date: 2017-12-23

3D panel is very popular in the construction.
The construction of a three-layer panel (3D panel) is a spatial truss structure consisting of a reinforcing mesh and galvanized or stainless steel rods welded at an angle to the welded reinforcing mesh, the core of polystyrene foam and two layers of concrete, supported by shotcrete.
Any project can be adapted to the construction technology of 3D panels. Create complex architectural shapes (round, square, sloping, segment), virtually any design. Rate the freedom to choose the architectural and design solutions due to the simplicity and flexibility of the technology with reinforced insulation boards. Bay windows, curved walls, wall fence, arches - all elements of the complex can be made without increase in the cost of construction and special architectural revisions.
How do you build curved or radius walls with 3D panel?
You can build curved or radius walls by cutting the wire of reinforcing welded mesh on one side of the panel. This will allow the panel to bend to the desired shape or radius. It is very important not to cut through the heavier truss wire so that wall strength and integrity remain intact.
3D panels are usually applied into:
·In the construction of residential buildings, 3 - 5 storey residential buildings; 3D panels are made into all the basic building blocks of buildings, walls, floors, roof, stairs.
·Public buildings, clubs, entertainment facilities, sports halls, farmhouses.
·Commercial, industrial and administrative buildings.
·Individual warm pools.
·Sound-absorbing and protecting fences.
·Warehouses and vegetable store.
·Storage containers including tanks.
·Architectural complex forms.
·Barges and docks.

Product Categories

News

3D Panel

Download